Vehicles do not always break down in convenient places. A car might become stranded beside a bridge, stop beneath a low-clearance structure, slide into a roadside barrier, or end up trapped near roadworks. These situations can be more complicated than an ordinary breakdown because the recovery may affect traffic, public property and the safety of other road users.

Why are infrastructure-related recoveries more complicated?

When a vehicle is stuck near public infrastructure, the operator has to consider more than how to move the vehicle. Bridges, tunnels, retaining walls, traffic signals, barriers, drainage systems and overhead structures can restrict access or create additional hazards. A recovery that seems straightforward from the driver’s seat may need careful planning from outside the vehicle.

The vehicle’s position also matters. A car blocking a traffic lane, resting against a barrier or stopped close to moving traffic can expose people to danger. There may be limited room for a tow truck to position itself, and the safest direction of movement may not be obvious. Operators need to assess the scene before attaching equipment or attempting to move the vehicle.

Common situations involving public infrastructure

Vehicles stuck near bridges and retaining walls

A vehicle can become immobilised on a bridge approach, beside a retaining wall or on a narrow section of road where there is little room to work. The edge of the road, the slope beneath it and the position of nearby traffic all affect the recovery plan. If a vehicle has slipped towards an edge or is resting against a structure, pulling it in the wrong direction could make the situation worse.

The operator may need to arrange traffic control or assistance from the relevant road authority before moving the vehicle. The priority is to stabilise the scene and determine a controlled path that avoids placing extra force on the vehicle or the structure.

Low-clearance car parks, tunnels and underpasses

Height restrictions can make recovery difficult when a vehicle breaks down inside a multi-storey car park, tunnel or underpass. A standard tow truck may be too tall to enter, while a vehicle with a damaged wheel or suspension may not roll normally. Tight turns, narrow ramps and limited overhead clearance can also prevent the truck from reaching the vehicle directly.

Before dispatch, share the exact location and any visible clearance signs with the towing provider. If possible, explain which level or entrance the vehicle is on and whether it can move under its own power. The operator can then assess whether low-clearance equipment, a different recovery method or support from site management is needed. Drivers should not attempt to force a vehicle through a restricted exit or move it in a way that risks further damage.

Roadside barriers, bollards and guardrails

A vehicle may become wedged against a guardrail, concrete divider, bollard or temporary barrier after a collision or loss of control. The obstruction can trap a wheel, damage the steering or suspension, or prevent the vehicle from being winched in a straight line. A barrier may also be damaged or unstable, so it should not automatically be treated as a safe anchor point.

Recovery equipment must be attached to suitable points on the vehicle, and any pulling direction should be chosen carefully. If public property has been damaged, the relevant authority or emergency services may need to be involved. The driver should avoid trying to reverse or accelerate free if the vehicle is caught on a barrier.

Vehicles trapped near roadworks

Temporary traffic layouts can create narrow lanes, uneven surfaces, loose gravel, steel plates and abrupt changes in road level. A vehicle may bottom out, lose traction or become stuck in a work zone. In these areas, moving traffic and construction machinery can add risk, and access may be controlled by site staff.

Tell the operator if the vehicle is inside a work zone and follow directions from authorised site personnel. A safe recovery may require coordination with the roadwork crew, a temporary traffic hold or access from a different direction. Never enter a closed work area or move cones and barriers to make space for a tow truck.

Flooded drains, kerbs and unusual roadside hazards

Heavy rain can leave vehicles stuck in roadside drains, soft verges or deep gutters. Other unusual obstacles include fallen branches, loose construction materials, damaged pavement and debris after a collision. The vehicle may look accessible but still be resting on an unstable surface or hiding damage underneath.

Water depth and current can be difficult to judge, and floodwater may conceal open drains, sharp debris or road damage. Do not walk into floodwater to inspect a vehicle or attempt to attach a strap. If water is rising or people are in immediate danger, move to a safe place and contact emergency services.

What happens during a complex vehicle recovery?

Every scene is different, but a careful recovery generally follows a few key steps. The operator first checks the surroundings, the vehicle’s condition and the risks to people nearby. They then decide what equipment and access are suitable, and whether traffic management or permission from an authority is required.

  1. Scene assessment: Check traffic flow, road width, ground stability, overhead clearance, nearby structures and any hazards such as leaking fluids or damaged electrical equipment.
  2. Vehicle assessment: Determine whether the vehicle can roll, steer or be safely moved, and look for damage to wheels, suspension, underbody or recovery points.
  3. Access and equipment planning: Choose a suitable truck and recovery method based on the vehicle’s position, weight, clearance limits and available working space.
  4. Coordination: Contact site management, road authorities, emergency services or traffic controllers when the scene requires their involvement.
  5. Controlled movement: Move the vehicle gradually using appropriate equipment and a planned route, keeping people clear of tensioned recovery gear and the vehicle’s path.
  6. Final checks: Check whether the vehicle can be transported safely and whether any debris, fluid spill or damage to public infrastructure needs to be reported.

Who is responsible when public property is damaged?

Responsibility depends on what happened, the circumstances and the applicable laws or insurance arrangements. If a vehicle collides with a barrier, sign, light pole or other public asset, the driver should report the incident to the appropriate authority where required and provide accurate details to their insurer. A towing operator’s role is to recover or transport the vehicle safely; it does not automatically determine who is liable for the damage.

If the recovery itself could affect a bridge, tunnel, road surface or other structure, the operator should avoid using the structure as an improvised anchor or applying force without a suitable assessment. The responsible road authority or site manager may need to inspect the area or approve access before work continues.

What information should you give the towing provider?

Clear information helps the operator send suitable equipment and reduces delays. When you call, provide:

  • Your exact location, including the road name, direction of travel, nearest intersection, bridge, tunnel, car park level or roadwork entrance.
  • The vehicle type and approximate size, and whether it is carrying a load.
  • What the vehicle is stuck against or trapped by, such as a barrier, kerb, drain or construction material.
  • Whether the vehicle can start, roll and steer, and whether a wheel or suspension component appears damaged.
  • Any height, width or access restrictions, including signs at a car park or tunnel entrance.
  • Whether the vehicle is blocking traffic, leaking fluid, exposed to floodwater or involved in a collision.
  • Any instructions already given by police, emergency services, road authorities or site personnel.

What should drivers do while waiting?

Safety comes first. If the vehicle is in a dangerous position, switch on the hazard lights if it is safe to do so and follow directions from emergency services or authorised personnel. Do not stand between the vehicle and a barrier, approach moving traffic, climb onto infrastructure or try to pull the vehicle free with another car.

If you can leave the vehicle safely and reach a protected area away from traffic, do so. If getting out would put you in greater danger, remain in a safe position and contact emergency services when needed. Avoid touching damaged wires, electrical equipment, leaking fluids or unstable debris. Keep bystanders away from the recovery area.

Frequently asked questions

Can a tow truck recover a car from a tunnel or low-clearance car park?

Often, but the method depends on the available clearance, access route and condition of the vehicle. Tell the provider about height limits and the exact level or location before the truck is dispatched.

Who should I call if a car is blocking a bridge or major road?

If there is immediate danger, a collision with injuries or a serious traffic hazard, contact emergency services. Otherwise, follow local reporting requirements and arrange recovery while keeping yourself away from moving traffic.

Can a vehicle be pulled away from a guardrail?

It may be possible, but the operator must assess how the vehicle is trapped, whether the barrier is damaged and which recovery points are suitable. Pulling in the wrong direction can worsen damage or create additional hazards.

Does a complicated recovery always need a road closure?

No. Some recoveries can be completed with limited traffic control, while others need a lane closure or help from the relevant authority. The decision depends on the location, traffic conditions and risks at the scene.

What if the vehicle is stuck in floodwater or a roadside drain?

Do not enter the water or attempt a DIY recovery. Floodwater can hide deep holes, open drains and unstable ground. Move to safety and contact emergency services if there is immediate danger, then explain the conditions to the recovery provider.